Customization: | Available |
---|---|
After-sales Service: | Within 24 Hours |
Warranty: | 12 Months After Trial Operation |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
D(DG) series pumps are the horizontal multistage centrifugal pumps, which is suitable for transporting
clean water(impurity less than 1%, particle size less than 0.1mm) and other similar liquid.
D series pumps are suitable for medium temperature, not more than 80°C, which is used for mine drainage
and water supply for factories, cities, and other places.
DG series pumps are suitable for medium temperature not more than 105°C, which are used for a small boiler
feedwater pump or other occasions where you need to transport hot water.
Structural Integrity: Rust-resistant, fully sealed shaft structure.
Working Principle: |
Centrifugal, Multi-stage |
Main applications: |
Water, hot water |
Driver: |
Electric motor, diesel motor |
Power Specs: |
220V/380/415V 3phase;50hz/60hz |
Max. permissible fluid temperature: |
80°C(176°F) or 105°C(221°F) hot water type |
Type of connection: |
Flange |
Installation position: |
Horizontal |
Pump casing material: |
Ductile iron, Stainless steel |
Impeller material: |
Ductile iron, Stainless steel, Bronze |
Shaft seal type: |
Mechanical seal; Packing seal |
Maximum drive rating: |
1120kW(1495HP) |
Maximum caliber: |
250mm(10inch) |
Maximum discharge-side pressure: |
10.5MPa(105bar) |
Maximum head: |
1056m(3463.7ft) |
Flow rate range: |
3.75-540m3/h(16.5-2376US.GPM) |